NGFW-Engineer인증덤프샘플문제 - NGFW-Engineer시험대비최신버전문제

Palo Alto Networks 인증NGFW-Engineer시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고Fast2test의Palo Alto Networks 인증NGFW-Engineer덤프자료에 주목하세요. Fast2test의 Palo Alto Networks 인증NGFW-Engineer덤프는 오로지 Palo Alto Networks 인증NGFW-Engineer시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.

Palo Alto Networks NGFW-Engineer 시험요강:

주제	소개
주제 1	PAN-OS Device Setting Configuration: This section evaluates the expertise of System Administrators in configuring device settings on PAN-OS. It includes implementing authentication roles and profiles, and configuring virtual systems with interfaces, zones, routers, and inter-VSYS security. Logging mechanisms such as Strata Logging Service and log forwarding are covered alongside software updates and certificate management for PKI integration and decryption. The section also focuses on configuring Cloud Identity Engine User-ID features and web proxy settings.
주제 2	Integration and Automation: This section measures the skills of Automation Engineers in deploying and managing Palo Alto Networks NGFWs across various environments. It includes the installation of PA-Series, VM-Series, CN-Series, and Cloud NGFWs. The use of APIs for automation, integration with third-party services like Kubernetes and Terraform, centralized management with Panorama templates and device groups, as well as building custom dashboards and reports in Application Command Center (ACC) are key topics.
주제 3	PAN-OS Networking Configuration: This section of the exam measures the skills of Network Engineers in configuring networking components within PAN-OS. It covers interface setup across Layer 2, Layer 3, virtual wire, tunnel interfaces, and aggregate Ethernet configurations. Additionally, it includes zone creation, high availability configurations (active active and active passive), routing protocols, and GlobalProtect setup for portals, gateways, authentication, and tunneling. The section also addresses IPSec, quantum-resistant cryptography, and GRE tunnels.

>> NGFW-Engineer인증덤프 샘플문제 <<

NGFW-Engineer인증덤프 샘플문제 인증시험정보

Fast2test 에서 제공해드리는 Palo Alto Networks인증NGFW-Engineer시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. Fast2test에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Palo Alto Networks인증NGFW-Engineer시험은Fast2test 표Palo Alto Networks인증NGFW-Engineer덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

최신 Network Security Administrator NGFW-Engineer 무료샘플문제 (Q14-Q19):

질문 # 14
According to dynamic updates best practices, what is the recommended threshold value for content updates in a mission- critical network?

A. 8 hours
B. 32 hours
C. 48 hours
D. 16 hours

정답：A

설명：
For a mission-critical network, it is recommended to configure the content update threshold to 8 hours. This ensures that the network is protected with the latest threat intelligence, updates to signatures, and other critical content, minimizing the exposure to newly discovered vulnerabilities and threats.
Regular content updates are crucial in mission-critical environments to ensure the firewall is up-to-date with the latest protections. 8 hours is considered an optimal balance between timely updates and network performance.

질문 # 15
By default, which type of traffic is configured by service route configuration to use the management interface?

A. Virtual system (VSYS)
B. IPSec tunnel
C. Autonomous Digital Experience Manager (ADEM)
D. Security zone

정답：C

설명：
By default, the Autonomous Digital Experience Manager (ADEM) traffic is configured to use the management interface in a Palo Alto Networks firewall. The management interface is typically used for management-related traffic, such as monitoring and logging, and it is configured to handle ADEM-related traffic for the optimal performance of digital experience monitoring features.
This default configuration helps ensure that ADEM traffic does not interfere with regular traffic that may traverse other interfaces, such as traffic from security zones or IPSec tunnels.

질문 # 16
After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish.
Which of the following actions will resolve this issue?

A. Ensure that an active static or dynamic route exists for the VPN peer with next hop as the tunnel interface.
B. Configure the Proxy IDs to match the Cisco ASA configuration.
C. Validate the tunnel interface VLAN against the peer's configuration.
D. Check that IPSec is enabled in the management profile on the external interface.

정답：B

설명：
The Proxy IDs (or Traffic Selectors) define the local and remote subnets that are allowed to communicate over the IPSec tunnel. If the Proxy IDs on the Palo Alto Networks firewall do not match the configuration on the Cisco ASA, the tunnel will fail to establish because the firewalls won't agree on which traffic to encrypt. Ensuring that the Proxy IDs match between the Palo Alto Networks firewall and the Cisco ASA will resolve the issue.

질문 # 17
During an upgrade to the routing infrastructure in a customer environment, the network administrator wants to implement Advanced Routing Engine (ARE) on a Palo Alto Networks firewall.
Which firewall models support this configuration?

A. PA-3260, PA-5410, PA-850, PA-460
B. PA-7050, PA-1420, VM-Series, CN-Series
C. PA-5280, PA-7080, PA-3250, VM-Series
D. PA-455, VM-Series, PA-1410, PA-5450

정답：A

설명：
The Advanced Routing Engine (ARE) is supported on Palo Alto Networks firewalls that utilize the PAN-OS 11.0+ software and have the required hardware architecture. The supported models include PA-3200 Series, PA-5400 Series, PA-800 Series, and PA-400 Series. These models provide enhanced routing capabilities, including BGP, OSPF, and more complex routing policies.
PA-3260 and PA-5410 are part of the PA-3200 and PA-5400 Series, which are known to support ARE.
PA-850 and PA-460 are within the PA-800 and PA-400 Series, which also support ARE

질문 # 18
Which two statements apply to configuring required security rules when setting up an IPSec tunnel between a Palo Alto Networks firewall and a third- party gateway? (Choose two.)

A. For incoming and outgoing traffic through the tunnel, separate rules must be created for each direction.
B. For incoming and outgoing traffic through the tunnel, creating separate rules for each direction is optional.
C. The IKE negotiation and IPSec/ESP packets are allowed by default via the intrazone default allow policy.
D. The IKE negotiation and IPSec/ESP packets are denied by default via the interzone default deny policy.

정답：A,D

설명：
Separate rules must be created for each direction: Palo Alto Networks firewalls enforce security policies based on traffic direction. To allow bidirectional communication through the IPSec tunnel, two separate rules are required - one for incoming and one for outgoing traffic.
IKE negotiation and IPSec/ESP packets are denied by default: Palo Alto Networks firewalls use an interzone default deny policy, meaning that unless an explicit policy allows IKE (UDP 500/4500) and ESP (protocol 50) traffic, the firewall will block these packets, preventing tunnel establishment. Therefore, administrators must create explicit rules permitting IKE and IPSec/ESP traffic to the firewall's external interface.

질문 # 19
......

Fast2test 에서 제공해드리는 Palo Alto Networks NGFW-Engineer덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 Palo Alto Networks NGFW-Engineer 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히Palo Alto Networks NGFW-Engineer시험을 패스할 수 있도록 최선을 다하고 있습니다.

NGFW-Engineer시험대비 최신버전 문제: https://kr.fast2test.com/NGFW-Engineer-premium-file.html